@lazylion_ca@lemmy.ca to Mildly Infuriating@lemmy.worldEnglish • 1 year agoLet's play Spot the Cold Solder.lemmy.caimagemessage-square35fedilinkarrow-up1162arrow-down19
arrow-up1153arrow-down1imageLet's play Spot the Cold Solder.lemmy.ca@lazylion_ca@lemmy.ca to Mildly Infuriating@lemmy.worldEnglish • 1 year agomessage-square35fedilink
minus-square@geekworking@lemmy.worldlinkfedilinkEnglish5•1 year agoNot sure if just glare, but a lot of these look like one side has too little solder like you didn’t use enough and/or it wasn’t flowing correctly.
minus-square@lazylion_ca@lemmy.caOPlinkfedilinkEnglish4•1 year agoIn theory. It’s mounted vertically inside a slow cooker, so over ten years of heating and cooling the solder might have flowed, but I suspect its just typical mass production.
Not sure if just glare, but a lot of these look like one side has too little solder like you didn’t use enough and/or it wasn’t flowing correctly.
In theory. It’s mounted vertically inside a slow cooker, so over ten years of heating and cooling the solder might have flowed, but I suspect its just typical mass production.